Ideas and tips

HOW TO MOUNT A THERMOSTATIC HEAD

 

Installing a thermostatic head is a very simple operation, presents no difficulties and can be carried out by anyone, you just need to follow a few main steps.

The first thing to do is to dismantle the old manual valve with your bare hands, which you will then replace with the new thermostatic head.

Having done this, with a 26" spanner, unscrew in a counter-clockwise direction where the stripes are without damaging the thread.

Once the nut has been removed you will be able to check whether the valve is manual or thermostatic. If there is a piston that can be pushed in, the valve is thermostatic.

If not (there is no piston), the valve is manual. To replace the valve cover, a professional plumber must be consulted.

Take the thermostat head, place it on point 5 and insert it with point 5 at the top. Tighten the back ring nut until it clicks into place.

Now you can adjust the desired temperature in the room.

 

Watch the video on how you can install a thermostatic head on your Irsap radiator 

 

 

Image

Do you need support?

See frequently asked questions in the dedicated area.

Image

Are you looking for a showroom?

If you would like to touch our products with your own hands, please visit our nearest showroom.